Phytophthora infestans RXLR effector Pi23014 targets host RNA-binding protein NbRBP3a to suppress plant immunity.

Phytophthora infestans is a destructive oomycete that causes the late blight of potato and tomato worldwide. It secretes numerous small proteins called effectors in order to manipulate host cell components and suppress plant immunity. Identifying the targets of these effectors is crucial for understanding P. infestans pathogenesis and host plant immunity. In this study, we show that the virulence RXLR effector Pi23014 of P. infestans targets the host nucleus and chloroplasts. By using a liquid chromatogrpahy-tandem mass spectrometry assay and co-immunoprecipitation assasys, we show that it interacts with NbRBP3a, a putative glycine-rich RNA-binding protein. We confirmed the co-localization of Pi23014 and NbRBP3a within the nucleus, by using bimolecular fluorescence complementation. Reverse transcription-quantitative PCR assays showed that the expression of NbRBP3a was induced in Nicotiana benthamiana during P. infestans infection and the expression of marker genes for multiple defence pathways were significantly down-regulated in NbRBP3-silenced plants compared with GFP-silenced plants. Agrobacterium tumefaciens-mediated transient overexpression of NbRBP3a significantly enhanced plant resistance to P. infestans. Mutations in the N-terminus RNA recognition motif (RRM) of NbRBP3a abolished its interaction with Pi23014 and eliminated its capability to enhance plant resistance to leaf colonization by P. infestans. We further showed that silencing NbRBP3 reduced photosystem II activity, reduced host photosynthetic efficiency, attenuated Pi23014-mediated suppression of cell death triggered by P. infestans pathogen-associated molecular pattern elicitor INF1, and suppressed plant immunity.

Coupling effect between hole storage and interfacial charge transfer over ultrathin CoPi-modified hematite photoanodes.

Understanding the functionality of the modification layer in regulating the charge transfer process at the semiconductor/electrolyte interface is of great significance to the rational design of photoelectrocatalytic water oxidation systems. Herein, by systematically investigating and comparing the charge transfer kinetics behaviors over ferrihydrite (Fh)- and cobalt phosphate (CoPi)-modified hematite (Fe2O3) photoanodes, we unveiled the essential relation between photocurrent enhancement and the charge transfer process. With the hole-storage material Fh as a reference, it was found that CoPi demonstrates high hole-storage capacity at a low bias region (<1.0 V vs. RHE) due to the effective release of Fermi level pinning. Afterwards, the stored holes would be timely injected into the electrolyte for water oxidation, caused by the enhanced charge separation in the presence of CoPi. In contrast, the decoration of Fh can only slightly passivate the surface states and promote hole injection in the high potential region. Subsequently, superior hole-storage capacity in the low-potential region is recognized as a crucial factor for photocurrent enhancement. These combined results provide new insights into the understanding of interfacial charge transfer kinetics.

Potential threat of SARS-CoV-2 in coastal waters.

A novel coronavirus (SARS-CoV-2) has caused more than 150 million confirmed infections worldwide, while it is not clear whether it affects the coastal waters. This paper proposed a biophysical model based on 16 scenarios with different virus half-life parameters to assess potential viral contamination from 25 municipal sewage outfalls into the Bohai Sea. Viral concentration maps showing spatial and temporal changes are provided based on a biophysical model under multiple scenarios. Results demonstrate that adjacent sea areas can become exposed to SARS-CoV-2 via water-borne transport from outfalls, with a higher risk in winter, because SARS-CoV-2 can be highly stable at low temperature. As coastal waters are the ultimate sink for wastewater and the epidemic will last for long time, this work is of great importance to raise awareness, identify vulnerable areas for marine mammals, and avoid the risk of exposure of tourists at bathing beach.

Killing Streptococcus mutans in mature biofilm with a combination of antimicrobial and antibiofilm peptides.

Biofilm poses a serious challenge for the treatment of bacterial infections, as it endows bacteria a pronounced resistance to traditional antibiotics. Antimicrobial peptides (AMPs) are considered potential substitutes for antibiotics. Combinational use of AMPs with other compounds to exert antibiofilm effects has been proved to be an effective means to reduce their toxicity and maximize their antimicrobial activity. However, the combination of various AMPs with different action mechanisms is rarely investigated. A newly designed lytic AMP ZXR-2.3 combined with antibiofilm peptide IDR-1018 or KT2 was tested for the antibiofilm effect on mature Streptococcus mutans biofilms. In general, the combination of ZXR-2.3 + IDR-1018 displayed synergistic effect on both biofilm eradication and bacterial killing, while ZXR-2.3 + KT2 showed no obvious synergism. The confocal images of preformed S. mutans biofilms confirmed the effective bactericidal activity of ZXR-2.3 + IDR-1018. A tube system was applied to investigate the biofilm infection under a flow of medium and SEM images indicated the biofilm disruption and bacterial killing effects of ZXR-2.3 + IDR-1018. Quantitative RT-PCR analysis showed that IDR-1018 induced dramatic changes in the mRNA expressions of the quorum sensing (QS) related genes comC, comD, vicR, and vicK of S. mutans in mature biofilms, whereas the other peptides and ciprofloxacin did not cause obvious changes in these genes. This might explain the better synergism of ZXR-2.3 and IDR-1018. The results of this study provide a potential application using the combination of different AMPs in the treatment of mature biofilm infection.

Surface-structured bacterial cellulose loaded with hUSCs accelerate skin wound healing by promoting angiogenesis in rats.

Promotion of wound healing is one of the most important fields in clinical medical research. This study aimed to evaluate the potential use of a new surface-structured bacterial cellulose(S-BC) biomaterial with human urine-derived stem cells (hUSCs) for wound healing. In vitro, EA.hy926 were inoculated on structured/non-structured bacterial cellulose, and the growth of EA.hy926 on bacterial cellulose in medium with/without conditioned medium of the hUSCs were observed to explore the effect of bacterial cellulose's surface structure and hUSCs-CM on vascular endothelial cell growth. In vivo, we covered wound surface with various BC materials and/or injected the hUSCs into the wound site on group BC, group S-BC, group hUSCs, group BC + hUSCs, group S-BC + hUSCs to evaluate the effect of S-BC and hUSCs on wound healing in rat full-thickness skin defect model. In vitro study, surface structure of S-BC could promote the growth and survival of EA.hy926, and the hUSCs-CM could further promote the proliferation of EA.hy926 on S-BC. In vivo study, wound healing rate of the group BC, group S-BC, group hUSCs was significantly accelerated, accompanied by faster re-epithelialization, collagen production and neovascularization than control group. It is note worthy that the effect of S-BC on wound healing was better than BC, the effect of S-BC + hUSCs on wound healing was better than BC + hUSCs. Moreover, the effect of S-BC combined with hUSCs on wound is better than treated with S-BC or hUSCs alone. All the findings suggest that the combination of S-BC and hUSCs could facilitate skin wound healing by promoting angiogenesis. This combination of the role of stem cells and biomaterial surface structures may provide a new way to address clinical wound healing problems.

Microfluidic Manufacturing of SN-38-Loaded Polymer Nanoparticles with Shear Processing Control of Drug Delivery Properties.

Two-phase gas-liquid microfluidic reactors provide shear processing control of SN-38-loaded polymer nanoparticles (SN-38-PNPs). We prepare SN-38-PNPs from the block copolymer poly(methyl caprolactone- co-caprolactone)- block-poly(ethylene oxides) (P(MCL- co-CL)- b-PEO) using bulk and microfluidic methods and at different drug-to-polymer loading ratios and on-chip flow rates. We show that, as the microfluidic flow rate ( Q) increases, encapsulation efficiency and drug loading increase and release half times increase. Slower SN-38 release is obtained at the highest Q value ( Q = 400 µL/min) than is achieved using a conventional bulk preparation method. For all SN-38-PNP formulations, we find a dominant population (by number) of nanosized particles (<50 nm) along with a small number of larger aggregates (>100 nm). As Q increases, the size of aggregates decreases through a minimum and then increases, attributed to a flow-variable competition of shear-induced particle breakup and shear-induced particle coalescence. IC25 and IC50 values of the various SN-38-PNPs against MCF-7 cells show strong flow rate dependencies that mirror trends in particle size. SN-38-PNPs manufactured on-chip at intermediate flow rates show both minimum particle sizes and maximum potencies with a significantly lower IC25 value than the bulk-prepared sample. Compared to conventional bulk methods, microfluidic shear processing in two-phase reactors provides controlled manufacturing routes for optimizing and improving the properties of SN-38 nanomedicines.

Self-assembly nanostructure controlled sustained release, activity and stability of peptide drugs.

Peptides are considered as a new generation of drugs due to their high structural and functional diversity. However, the development of peptide drugs is always limited by their poor stability and short circulation time. Carriers are applied for peptide drug delivery, but there may be problems like poor loading efficiency and undesired xenobiotic toxicity. Peptide self-assembly is an effective approach to improve the stability and control the release of peptide drugs. In this study, two self-assembling anticancer peptides are designed by appending a pair of glutamic acid and asparagine to either the N-terminus or the C-terminus of a lytic peptide. This simple, yet rational sequence modification was made to change the amphiphilic pattern and secondary structural content of the parent peptide, thereby modulating its self-assembly process. It was found that the N-terminus modified peptide favors the formation of nanofibrils and the peptide with C-terminal modification formed micelles. Although both nanostructures showed prolonged action profiles and improved serum stability compared to the parent peptide, the morphology of the nanostructures is highly critical to manipulate the release profile of the free peptide from the assembly and regulate their bioactivity. We believe the self-assembly approach demonstrated in this study can be applied to a variety of therapeutic peptide drugs to improve their stability and therapeutic activity for the development of carrier-free drug delivery system.

Controlling Structure and Function of Polymeric Drug Delivery Nanoparticles Using Microfluidics.

We demonstrate control of multiscale structure and drug delivery function for paclitaxel (PAX)-loaded polycaprolactone-block-poly(ethylene oxide) (PCL-b-PEO) polymeric nanoparticles (PNPs) via synthesis and flow-directed shear processing in a two-phase gas-liquid microfluidic reactor. This strategy takes a page from the engineering of commodity plastics, where processing rather than polymer chemistry provides an experimental handle on properties and function. PNPs formed from copolymers with three different PCL block lengths show sizes, morphologies, and loading efficiencies that depend on both the PCL block length and the microfluidic flow rate. By varying flow rate and comparing with a conventional bulk method of PNP preparation, we show that flow-variable shear processing provides control of PNP sizes and morphologies and enables slower PAX release times (up to 2 weeks) compared to bulk-prepared PNPs. Antiproliferative effects against cultured MCF-7 breast cancer cells were greatest for PNPs formed at an intermediate flow rate, corresponding to small and low-polydispersity spheres formed uniquely at this flow condition. Formation and flow-directed nanoscale shear processing in gas-liquid microfluidic reactors provides a manufacturing platform for drug delivery PNPs that could enable more effective and selective nanomedicines through multiscale structural control.

Synthesis, Self-Assembly, and Drug Delivery Characteristics of Poly(methyl caprolactone-co-caprolactone)-b-poly(ethylene oxide) Copolymers with Variable Compositions of Hydrophobic Blocks: Combining Chemistry and Microfluidic Processing for Polymeric Nanomedicines.

The synthesis, characterization, and self-assembly of a series of biocompatible poly(methyl caprolactone-co-caprolactone)-b-poly(ethylene oxide) amphiphilic block copolymers with variable MCL contents in the hydrophobic block are described. Self-assembly gives rise to polymeric nanoparticles (PNPs) with hydrophobic cores that decrease in crystallinity as the MCL content increases, and their morphologies and sizes show nonmonotonic trends with MCL content. PNPs loaded with the anticancer drug paclitaxel (PAX) give rise to in vitro PAX release rates and MCF-7 GI50 (50% growth inhibition concentration) values that decrease as the MCL content increases. We also show for selected copolymers that microfluidic manufacturing at a variable flow rate enables further control of PAX release rates and enhances MCF-7 antiproliferation potency. These results indicate that more effective and specific drug delivery PNPs are possible through tangential efforts combining polymer synthesis and microfluidic manufacturing.

How charge distribution influences the function of membrane-active peptides: Lytic or cell-penetrating?

Lytic and cell-penetrating peptides (CPPs) are both membrane-active peptides sharing similar physicochemical properties. Although their respective functions have been intensively investigated, the difference of intrinsic properties between these two types of peptides is rarely discussed. In this study, we designed a series of analogs of a recently discovered CPP ZXR-1 (FKIGGFIKKLWRSKLA) by varying the charge distributions both on the helical wheel projection and along the sequence. These peptides showed different functions on cell membranes, including membrane lytic (peptide Z1), cell-penetrating (peptide ZXR-1, Z2 and Z3), and inactive (peptide Z4) peptides. The three groups of peptides displayed different interactions with model lipid monolayer, and found that peptide insertion might be an important dynamic step to distinguish lytic and cell penetrating functions. Based on the analysis of charge distribution patterns, it was proposed that the charge distributions on the helical wheel and along the sequence are both able to influence the functions of the membrane-active peptides. This finding provides a further understanding about the effect of charge distribution on the functions of membrane-active peptides, and will be helpful for the design of functional peptides.

From a pro-apoptotic peptide to a lytic peptide: One single residue mutation.

Further discovery and design of new anticancer peptides are important for the development of anticancer therapeutics, and study on the detailed acting mechanism and structure-function relationship of peptides is critical for anticancer peptide design and application. In this study, a novel anticancer peptide ZXR-1 (FKIGGFIKKLWRSKLA) derived from a known anticancer peptide mauriporin was developed, and a mutant ZXR-2 (FKIGGFIKKLWRSLLA) with only one residue difference at the 14th position (Lys→Leu) was also engineered. Replacement of the lysine with leucine made ZXR-2 more potent than ZXR-1 in general. Even with only one residue mutation, the two peptides displayed distinct anticancer modes of action. ZXR-1 could translocate into cells, target on the mitochondria and induce cell apoptosis, while ZXR-2 directly targeted on the cell membranes and caused membrane lysis. The variance in their acting mechanisms might be due to the different amphipathicity and positive charge distribution. In addition, the two Ile-Leu pairs (3-10 and 7-14) in ZXR-2 might also play a role in improving its cytotoxicity. Further study on the structure-function relationship of the two peptides may be beneficial for the design of novel anticancer peptides and peptide based therapeutics.

Multiscale Control of Hierarchical Structure in Crystalline Block Copolymer Nanoparticles Using Microfluidics.

Hierarchical semicrystalline block copolymer nanoparticles are produced in a segmented gas-liquid microfluidic reactor with top-down control of multiscale structural features, including nanoparticle morphologies, sizes, and internal crystallinities. Control of multiscale structure on disparate length scales by a single control variable (flow rate) enables tailoring of drug delivery nanoparticle function including release rates.

Facile room-temperature solution-phase synthesis of a spherical covalent organic framework for high-resolution chromatographic separation.

A simple and facile room-temperature solution-phase synthesis was developed to fabricate a spherical covalent organic framework with large surface area, good solvent stability and high thermostability for high-resolution chromatographic separation of diverse important industrial analytes including alkanes, cyclohexane and benzene, α-pinene and ß-pinene, and alcohols with high column efficiency and good precision.